DESCRIPTION
STP Fuel Injector Cleaner is specially formulated to remove power-robbing deposits from all fuel injection systems. One treatment helps unclog injectors to restore accurate injector spray patterns and lost power, quickly dissolving deposits to improve the engine\'s performance. The difference will, in most cases, be noticed within 2 - 2,5 km.
FEATURES
STP Fuel Injector Cleaner used regularly helps:
- Smooth out rough idling
- Clean and condition the entire fuel delivery system
- Improve fuel economy
- Restore power and acceleration
- Reduce exhaust emissions
STP Fuel Injector Cleaner:
- Clears clogged injectors in just one tankful
- Is safe to use with other STP additives
- Can be used with both petrol and diesel powered vehicles
- Is safe to use in turbo/super charged vehicles and those fitted with catalytic converters
- Does not harm oxygen sensors
HOW DOES IT WORK?
- Carbon deposits caused by the normal combustion process of an engine can build up quickly, even in a new car within 1000 miles, particularly from short stop-and-go trips Over the hours when an engine is turned off, small amounts of deposits cool and dry out When the engine is restarted, some of the initial fuel sprayed into the combustion chamber clings to or is absorbed by the cool deposits, resulting in problems at start-up Once the engine heats up, however, the fuel in the deposits is volatized and engine operation returns to normal.
Fuel injectors are designed to deliver a precisely measured mist of fuel into the combustion chamber, and at roughly the diameter of a human hair, it only takes a small amount of dirt or debris to cause serious blockage problems A dirty injector disrupts the fine pattern into a coarse, intermittent stream As little as 10% flow restriction in a single fuel injector can result in poor starting, rough idling, poor combustion, hesitation or power loss under acceleration, stalling, loss of fuel economy and increased emissions.
- The patented formula in STP Fuel Injector Cleaner actually attacks and removes power robbing injector deposits to improve the engine\'s performance. The detergent removes all deposits from the surfaces of the injectors, improving and restoring the injector spray patterns. Then the dispersant in STP Fuel Injector Cleaner carries all deposits removed by the detergent through the combustion chambers and out of the exhaust system.
APPLICATION INSTRUCTIONS
- One 250ml bottle is sufficient for 50-60 liters of petrol. The whole bottle should be added directly to a full tank. For best results use every 3000-miles/5000 km.
LOGISTICS
Product name Injector Cleaner 200 ml.
Product no ST53250
Product barkode 5018704355314
Quantity in Package 12
Number of packages in palette 76
|
|
