Permo-Chim Duo |
|
Description |
It is a double-component, cement-based, acrylic modified, elastic waterproof coating mortar whose liquid component is pure elastomeric resin emulsion, and powder component is a mixture of hydraulic binder, additive and filler. |
|
Usage Area |
It is used for the positive (inside) insulation of water tanks, pools, and cisterns made up of bricks or, rough or plastered cement.
In waterproofing of terrace roofs, it is used as a base coat under the coating or as the last coat.
It is used for the positive insulation of foundations, retaining and shear walls against ground humidity and water leakage.
It is used for waterproofing basements from outside.
It is used for waterproofing balconies, and the inside of planter boxes.
It is used for waterproofing the floor of damp environments such as bathrooms, kitchens, toilets, etc. to prevent water leakage to the storey below.
It is used for coating sea water and waste water drainage channels and chambers.
It is used for waterproofing galleries, and drainage and water channels.
In bridges, viaducts, and engineering works it is used as a protective coating against defrosting salts.
It is used for adhering coating materials such as ceramic, granite, marble, etc. |
|
Advantages |
It is applied onto damp surfaces.
It is practical to use. You just mix the powder component with the liquid component and apply.
Unlike similar products, it is resistant to sunlight.
It provides an economical solution.
It is applied onto the side exposed to water (positive water pressure).
It is elastic.
It is suitable for foot traffic. It is an economical application for terrace roofs and walkways.
It protects concrete and plaster surfaces against air pollution, and acidic atmospheric gases.
While it is waterproof, it provides breathability for the surface. It protects concrete and plastered surfaces from carbonization and chloride. |
|
Application |
10 liters of liquid component of Permo Chim Duo is poured into a clean container and powder component is added; it is mixed to a thick, homogenous consistency. Permo Chim Duo is applied at least in two coats with a brush, roller, or trowel. Each coat must be applied as the former coat starts to solidify, and before it dries up. If necessary, the floor must be slightly moisturized before the application of the second coat. Cracks and vertical/horizontal seams must be reinforced with materials such as seam tape, plaster mesh, etc. between the application of two coats. Application onto perlite concrete, gas concrete or any high porosity concrete requires extra attention; Permo Chim Duo must be applied onto these surfaces after the application of alum or plaster. |
|
Consumption |
1-1.5 kg/m² for each coat; total consumption is 4 kg/m² maximum, with two coats minimum. |
|
Packaging |
The powder component is available in a 25 kg kraft bag.
The liquid component is available in a 10 lt plastic drum. |
|
|
|