| Speed-X Liquid |
| |
| Description |
| It is a ready-to-use liquid admixture for waterproofing and accelerated setting. |
| |
| Usage Area |
![\"\"src="http://www.emulzer.com.tr/emulzer/img/check.gif\"]() It is used for preventing humidity and water leakage in concrete, brick walls, and stones.
![\"\"src="http://www.emulzer.com.tr/emulzer/img/check.gif\"]() It is an immediate solution to stop water leakage in foundation shear walls, basements, water tanks, elevator shafts and damaged water pipes.
![\"\"src="http://www.emulzer.com.tr/emulzer/img/check.gif\"]() It can be used on concrete, plaster, alum, and brick. |
| |
| Advantages |
![\"\"src="http://www.emulzer.com.tr/emulzer/img/check.gif\"]() It is caustic. It does not cause any damage for the rebar.
![\"\"src="http://www.emulzer.com.tr/emulzer/img/check.gif\"]() Due to its content, the leakage slows down, and it helps to detect the source of leakage, thus allowing repairment.
![\"\"src="http://www.emulzer.com.tr/emulzer/img/check.gif\"]() It is economical. |
| |
| Application |
| Speed-X Liquid must be used with fresh, non-coagulant Portland cement. In the application plastic containers and rubber gloves must be used. It must be 1/1 to 1/3 diluted with water depending on the duration of setting. It must be mixed with cement in a plastic container and pressed immediately onto damp surface with a trowel or rubber gloves. Severe leakage problems require drainage with a rubber trunk by using a paste prepared with Speed-X Liquid. |
| |
| Consumption |
| Depends on requirement. |
| |
| Packaging |
| 5 kg plastic drum |
