DESCRIPTION
- Single component, polyurethane based foam applied with gun
APPLICATION FIELDS
- It is used in fixing door and window frames, insulation of joints, montage of pipe and electrical installation, fixing and insulation all roof and wall elements, filling mineral based construction element joints for protection purpose against fire.
FEATURES
- B1 class fire resistance
- Rapid freezing
- Moisture curing
- Over paint able
- Suitable for application up to 20 mm joint widths
- Guaranteed constant volume
- Bonds to all surfaces except PE, Teflon
TECHNICAL SPECIFICATIONS
Density : 32 g / ml
Heat conductivity : 0,035 W / mk (DIN 53422)
Temperature resistance : -40°C to 100°C
Application temperature : 5°C to 30°C
Non-tacky time : 7 - 10 minutes
Curing period : 45 minutes - 2 hours
Shear strength : 4 N / cm2 (DIN 53422)
Shelf life : 15 months (at 20°C)
APPLICATION INSTRUCTIONS
- Surfaces to be applied are moistened with water and marked with masking tape. After the tube is shaken completely, it is installed into Sista PU Foam with gun. After application, the pistol can be reused within 1 week without any cleaning needed. Sista Foam Cleaner should be used for longer period.
CAUTION
- Protective goggles, gloves and clothes must be worn during application. Avoid from contact with eyes and skin. Keep away from reach of the children.
- Consult to your doctor in case of contact with skin.
- Cured material can only be removed mechanically. Do not endeavor to remove it by using any chemical.
LOGISTICS
Product name PU Foam With Gun 750 ml
Product no 585131
Product barkode 8691451900012
Quantity in Package 12
Number of packages in palette 90
|
|
