| ANTI FROST -10ºC |
| |
| Description |
| As an anti-gel universal concrete additive it prevents fresh concrete from freezing by increasing the heat of hydration. |
| |
| Usage Area |
| It is used for concreting at low temperatures up to -10ºC, and when frost is expected at night. |
| |
| Advantages |
| Because it does not contain any calcium chlorure, it does not cause any damage for the rebar. It is non-corrosive. Adding Anti Frost -10ºC provides a plastic and more fluid concrete. Its workability increases, and water/cement ratio decreases. It provides early strength, and increases final strength and pull-out resistance. |
| |
| Application |
| Preferably Anti Frost -10ºC is either added to mixing water or poured into concrete mixer simultaneously with the mixing water. It is not recommended to be added to dry concrete mix. Subsequently the usual process recommended for a good concrete production is carried on. |
| |
| Consumption |
| 1% of cement weight between +5ºC and -5ºC. 2% of cement weight between -5ºC and -10ºC. Adding a greater amount of antifreeze is not helpful in concreting at temperatures below -10ºC. |
| |
| Packaging |
| 25 kg plastic drum |
